Geek Bar Pulse X Screen Meanings: What 0% Juice or Battery Means

Quick answer: The Geek Bar Pulse X 25K has a 3D curved screen that shows battery and e-liquid status. If a reading drops to 0% or empty, first figure out which one it is. A low battery reading means you should charge the device over USB-C. An empty e-liquid reading means the sealed 18 mL tank is used up and it’s time to replace the device. For the exact icon layout, go by the insert in your box. We don’t guess at symbols.

For adults 21+ only.

The problem: what is the Pulse X screen telling you?

The Pulse X was the first disposable with a 3D curved screen. That screen is useful, but it isn’t always obvious. The most common question is “what does 0% mean?”, and the answer depends on whether the 0 is the battery reading or the e-liquid reading.

30-second fixes

• Battery reading at 0% or low: plug in a USB-C cable and charge until the screen shows charged.
• Screen blank: charge first. Many “dead screen” cases are just a flat battery. Charge until the display responds, then let it rest.
• E-liquid reading at 0% or empty: recharging and resetting won’t bring juice back. Replace the device.
• Not sure which reading is which: check the insert in the box or Geek Bar’s official support.
• Still not hitting: work through Pulse X troubleshooting.

Step by step: reading the Pulse X screen

1. Wake the screen. Take a gentle puff. The device is draw-activated, so there’s no fire button. If nothing lights up, charge it.
2. Find the two readings. The screen shows battery status and e-liquid status. Your box insert shows which icon is which.
3. Read the battery level. If it’s low or at 0%, charge over USB-C until the screen shows full, then rest it for a few minutes.
4. Read the e-liquid level. This shows how much of the 18 mL pre-filled tank is left. The device can’t be refilled.
5. Remember the mode. Pulse mode uses liquid and battery faster than Regular mode. Rated output is up to 25,000 puffs in Regular or 15,000 in Pulse, so the e-liquid level drops faster in Pulse.
6. First time setting it up? See how to use the Geek Bar Pulse X.

See Geek Bar Pulse settings for both modes.

A note on other icons: We only describe what the product pages and our tested guides confirm, which is the battery and e-liquid readings. For any other symbol, animation or flashing pattern, go by the insert in the box or Geek Bar’s official support. We don’t publish blink charts we can’t verify.

Pulse X2 screen

The Geek Bar Pulse X2 50K also has a 3D curved screen that shows battery and e-liquid levels at a glance, so the same 0% rule applies: charge it for a low battery and replace it when the e-liquid is empty.

When to replace it

The Pulse X is a sealed, pre-filled disposable. It’s time for a new one when:

• the e-liquid reading shows empty or 0%
• it still won’t hit after a full charge, a roughly 10-minute rest, a clear airflow path and gentle puffs
• the housing is cracked or leaking heavily. Don’t open it. Replace it and dispose of it according to your local rules for battery electronics.

Pick your next one from our best Geek Bar Pulse X flavors. The Pulse X is $24.99, or 2 for $44.99 and 3 for $59.99, as shown on the product page.

Shop Geek Bar Pulse X

• Geek Bar Pulse X 25K
• Geek Bar Pulse X2 50K
• Best Geek Bar Pulse X flavors
• Full Geek Bar vape collection

FAQ

What does 0% mean on a Geek Bar Pulse X?

It depends on which reading shows 0%. If it’s the battery reading, charge the device over USB-C. If it’s the e-liquid reading, the sealed 18 mL tank is empty and the device needs to be replaced. Your box insert shows which icon is which.

What does the Geek Bar Pulse X screen show?

The 3D curved screen shows battery and e-liquid status. For the meaning of any other icon or animation, check the insert in the box or Geek Bar’s official support.

Why is my Pulse X screen blank?

Usually the battery is flat. Charge it with a USB-C cable until the display responds, then let it rest. If it’s still blank, follow our Pulse X troubleshooting guide.

Can I refill a Pulse X when the juice shows empty?

No. The Pulse X is a sealed, pre-filled disposable. When the e-liquid reading shows empty, replace the device.

Why does the e-liquid level drop faster in Pulse mode?

Pulse mode uses liquid and battery faster. The Pulse X is rated for up to 25,000 puffs in Regular mode and up to 15,000 in Pulse mode.

Does the Pulse X2 screen work the same way?

Yes for the basics. The Pulse X2 50K also has a 3D curved screen that shows battery and e-liquid levels. Charge it when the battery is low and replace it when the e-liquid is empty.